New Hampshire Heating & Cooling Experts
• Same Day Appointments
• No Service Fee With Repairs
• Fast, Friendly & Affordable Service
• Fully Licensed & Insured• Free Estimates
New Hampshire Geothermal Repair Service
Geothermal Repair in Southern New Hampshire – Expert Service from Courtesy Heating and Cooling
If your geothermal heating and cooling system isn’t working like it should, turn to the local experts at Courtesy Heating and Cooling. We provide fast, honest, and skilled geothermal repair service across Exeter, Portsmouth, Dover, Manchester, Nashua, Wolfeboro, and surrounding New Hampshire towns.
Don’t Wait — Fix It the Right Way
Geothermal systems are built to last — but like any HVAC system, they can run into problems. When that happens, you need a trained technician who understands how these systems work.
Our team is experienced in diagnosing and repairing all types of geothermal heat pump systems, both open- and closed-loop.
Signs You Might Need Geothermal Repair:
-
No heating or cooling
-
Uneven temperatures in your home
-
Low airflow or strange noises
-
Unusually high electric bills
-
Water or moisture around indoor units
-
System turns on and off too often (short cycling)
If you notice any of these issues, call us right away. Catching the problem early can prevent bigger repairs and save money.
Get Your System Repaired Today!
Let’s make your home more comfortable and energy-efficient. Call now to schedule service or request a free estimate.
Call 603-777-7749
Based in Brentwood, NH
We Repair All Geothermal Brands
Whether we installed your system or not, we can fix it. We work on:
-
WaterFurnace
-
ClimateMaster
-
Bosch
-
GeoComfort
-
And more
Our vans are fully stocked so we can often fix the problem in just one visit.
Why Choose Courtesy Heating and Cooling?
-
✅ Experienced with geothermal systems
-
✅ Honest quotes and fair pricing
-
✅ On-time, respectful technicians
-
✅ Clear communication — no jargon
-
✅ Based in New Hampshire — we know the local ground and weather conditions
We’re here to help you stay comfortable, year-round.
How Geothermal Systems Work, and What Can Go Wrong
A geothermal heat pump moves heat between your home and the ground through a loop of buried pipe (a closed loop) or well water (an open loop). Inside the house, the heat pump unit contains a compressor, a refrigerant circuit, a water-to-refrigerant heat exchanger and a blower. Many systems also have a flow center with circulating pumps, and some have a desuperheater that helps heat domestic hot water. A problem in any of these parts can reduce comfort or stop the system, so we test the whole system rather than guessing.
Common geothermal repairs
- Loop flow and pressure problems. Low loop pressure, air in a closed loop or a failed flow center pump reduces heat transfer and can trigger a lockout.
- Open-loop water issues. Mineral scale, iron or sediment from well water can foul the heat exchanger and restrict flow.
- Refrigerant circuit problems, including leaks, expansion valve issues and reversing valve faults that affect heating or cooling mode.
- Compressor and electrical faults, such as failed capacitors, contactors or wiring.
- Blower and airflow problems, including dirty filters, blower motor failures and duct restrictions.
- Control and sensor faults that cause lockouts or error codes on the unit.
- Auxiliary and backup heat problems that leave the house cold during very cold weather.
Lockouts and error codes
Geothermal units protect themselves by shutting down when they sense a problem, such as high or low pressure or low loop temperature. Resetting the system may get it running for a while, but repeated lockouts mean something needs attention. Write down any code or blinking light pattern you see, and tell us when you call. It helps us diagnose the problem faster.
What to check before you call
- Confirm the thermostat is set correctly and has power.
- Check the breakers for the heat pump and the flow center or well pump.
- Look at the air filter and replace it if it’s dirty.
- Note whether backup or emergency heat is running, and whether the house is warm or cold.
Repair or replace?
The buried loop usually lasts much longer than the heat pump unit inside the house. When an older indoor unit needs a major repair, replacing just the heat pump while keeping a sound loop can be a practical option. We’ll give you an honest assessment of both paths. See geothermal installation for more on new systems.
Preventing future problems
Annual service lets us check loop pressure and flow, clean or check the heat exchanger, test electrical parts and look for early signs of trouble. Learn more on our geothermal maintenance page and ask about our $50 Off Maintenance offer. For repairs, ask about Free Diagnostic With Repair and 15% Off Repairs.
Where we repair geothermal systems
We repair geothermal systems in Exeter, NH, Portsmouth, NH, Dover, NH, Manchester, NH, Nashua, NH, Concord, NH and Wolfeboro, NH, and across our wider New Hampshire service area. If your system fails outside office hours, call our 24/7 emergency service line at (603) 777-7749, or see our emergency HVAC service page.
Frequently Asked Questions
Why does my geothermal system keep locking out?
Repeated lockouts usually point to a loop flow or pressure problem, low airflow, a refrigerant issue or a failed sensor. A technician can read the fault and test the system to find the cause.
Do you repair geothermal systems you didn’t install?
Yes. We work on systems from many manufacturers, including WaterFurnace, ClimateMaster, Bosch and GeoComfort.
Is my geothermal loop likely to need replacement?
Loop problems do happen, but most repairs involve the indoor heat pump, flow center or controls. We test before recommending any loop work.
How do I schedule geothermal repair?
Call (603) 777-7749 or use the Schedule An Appointment button on this page.















